Enterasys SecureStack C2 User Manual

set gvrp
8-22 802.1Q VLAN Configuration
set gvrp
UsethiscommandtoenableordisableGVRPgloballyonthedeviceorononeormoreports.
Syntax
set gvrp {enable | disable} [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,GVRPwillbedisabledorenabledforallports.
Mode
Switchcommand,read‐write.
Examples
ThisexampleshowshowtoenableGVRPgloballyonthedevice:
C2(su)->set gvrp enable
ThisexampleshowshowtodisableGVRPgloballyonthedevice:
C2(su)->set gvrp disable
ThisexampleshowshowtoenableGVRPonge.1.3:
C2(su)->set gvrp enable ge.1.3
clear gvrp
UsethiscommandtoclearGVRPstatusorononeormoreports.
Syntax
clear gvrp [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,GVRPstatuswillbeclearedforallports.
Mode
Switchcommand,read‐write.
disable|
enable
DisablesorenablesGVRPonthedevice.
port‐string (Optional)DisablesorenablesGVRPonspecificport(s).Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntaxUsedin
theCLI”onpage 5‐2.
port‐string (Optional)ClearsGVRPstatusonspecific port(s).Foradetaileddescriptionof
possibleport‐stringvalues,referto“PortStringSyntaxUsedintheCLI”on
page 5‐2.

Enterasys SecureStack C2 Specifications

General

Brand	Enterasys
Model	SecureStack C2
Category	Switch
Language	English