Enterasys SecureStack C2 User Manual

show switch stack-ports
2-8 Configuring Switches in a Stack
Parameters
Defaults
None.
Mode
Switchcommand,read‐only.
Examples
Thisexampleshowshowtodisplayswitchtypeinformationaboutallswitchesinthestack:
C2(ro)->show switch switchtype
Mgmt Code
SID Switch Model ID Pref Version
--- -------------------------------- ---- ---------
1 C2G124-24 1 0xa08245
2 C2K122-24 1 0xa08245
3 C2G124-48 1 0xa08245
4 C2G124-48P 1 0xa08245
5 C2H124-48 1 0xa08245
6 C2H124-48P 1 0xa08245
7 C2G134-24P 1 0xa08245
8 C2G170-24 1 0xa08245
ThisexampleshowshowtodisplayswitchtypeinformationaboutSID1:
C2(ro)->show switch switchtype 1
Switch Type 0x56950200
Model Identifier C2G124-24
Switch Description Enterasys Networks, Inc. C2 --
Model C2G124-24
Management Preference 1
Expected Code Version 0xa08245
Supported Cards:
Slot 0
Card Index (CID) 1
Model Identifier C2G124-24
show switch stack-ports
Usethiscommandtodisplayvariousdataflowanderrorcountersonstackports.
Syntax
show switch stack-ports [unit]
Parameters
Defaults
None.
switchindex (Optional)Specifiestheswitchindex(SID)oftheswitchtypetodisplay.
unit (Optional)SpecifiestheswitchunitID,anintegerrangingfrom1to8.

Enterasys SecureStack C2 Specifications

General

Brand	Enterasys
Model	SecureStack C2
Category	Switch
Language	English