Enterasys SecureStack C2 User Manual

clear linkflap down
SecureStack C2 Configuration Guide 5-27
Example
Thisexampleshowshowtosetthelinkflapdowntimeonportge.1.4to5000seconds.
C2(rw)->set linkflap downtime ge.1.4 5000
clear linkflap down
Usethiscommandtotogglelinkflapdisabledportstooperational.
Syntax
clear linkflap down [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,allportsdisabledbyalinkflapviolationwillbemadeoperational.
Mode
Switchmode,read‐write.
Example
Thisexampleshowshowtomakedisabledportge.1.4operational.
C2(rw)->clear linkflap down ge.1.4
clear linkflap
Usethiscommandtoclearalllinkflapoptionsand/orstatisticsononeormoreports.
Syntax
clear linkflap {all | stats [port-string] | parameter port-string {threshold |
interval | downtime | all}
Parameters
Defaults
Ifport‐stringisnotspecified,settingsand/orsta tisticswillbeclearedonallports.
Mode
Switchmode,read‐write.
port‐string (Op tional)Specifiestheportstomakeoperational.
all|stats Clearsalloptionsandstatistics,orclearsonlystatistics.
parameter Clearslinkflapparameters.
threshold|interval|
downtime|all
Clearslinkflapthreshold,interval,downtimeorallparameters.
port‐string (Optionalunlessparameterisspecified)Specifiestheport(s)onwhich
toclearsettings.

Enterasys SecureStack C2 Specifications

General

Brand	Enterasys
Model	SecureStack C2
Category	Switch
Language	English