Enterasys SecureStack C2 User Manual

Configuring Simple Network Time Protocol (SNTP)
SecureStack C2 Configuration Guide 12-25
Example
Thisexampleenablesmulticastfloodprotection.
C2(su)->set mac unreserved-flood enable
Configuring Simple Network Time Protocol (SNTP)
Purpose
ToconfiguretheSimpleNetworkTimeProtocol(SNTP),whichsynchronizesdeviceclocksina
network.
Commands
show sntp
UsethiscommandtodisplaySNTPclientsettings.
Syntax
show sntp
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
For information about... Refer to page...
show sntp 12-25
set sntp client 12-27
clear sntp client 12-27
set sntp server 12-28
clear sntp server 12-28
set sntp poll-interval 12-29
clear sntp poll-interval 12-29
set sntp poll-retry 12-30
clear sntp poll-retry 12-30
set sntp poll-timeout 12-31
clear sntp poll-timeout 12-31

Enterasys SecureStack C2 Specifications

General

Brand	Enterasys
Model	SecureStack C2
Category	Switch
Language	English