Enterasys SecureStack C2 User Manual

clear port lacp
SecureStack C2 Configuration Guide 5-45
Mode
Switchcommand,read‐write.
Usage
LACPcommandsandparametersbeginningwithan“a”(suchasaadminkey)setacto rvalues.
Correspondingcommandsandparametersbeginningwitha“p”(suchaspadminkey)set
correspondingpartnervalues.ActorreferstothelocaldeviceparticipatinginLACPnegotiation,
whilepartnerreferstoitsremotedevicepartnerattheother
endofthenegotiation.Actorsand
partnersmaintaincurrentstatusoftheotherviaLACPDUscontaininginformationabouttheir
ports’LACPstatusandoperationalstate.
Example
Thisexampleshowshowtosettheactoradminkeyto3555forportge.3.16:
C2(su)->set port lacp ge.3.16 aadminkey 3555
clear port lacp
Usethiscommandtoclearlinkaggregationsettingsforoneormoreports.
Syntax
clear port lacp port port-string {[aadminkey] [aportpri] [asyspri] [aadminstate
{lacpactive | lacptimeout | lacpagg | lacpsync | lacpcollect | lacpdist | lacpdef
| lacpexpire | all}] [padminsyspri] [padminsysid] [padminkey] [padminportpri]
[padminport] [padminstate {lacpactive | lacptimeout | lacpagg | lacpsync |
lacpcollect | lacpdist | lacpdef | lacpexpire | all}]}
Parameters
portport‐string Specifiesthephysicalport(s)onwhichLACPsettingswillbecleared.For
adetaileddescriptionofpossibleport‐stringvalues,referto“PortString
SyntaxUsedintheCLI”onpage5‐2.
aadminkey Clearsaport’sactoradminkey.
aportpri Clearsaport’sactorportpriority.
asyspri
Clearstheport’sactorsystempriority.
aadminstate
lacpactive|
lacptimeout|
lacpagg|lacpsync
|lacpcollect|
lacpdist|lacpdef|
lacpexpire|all
Clearsaport’sspecificactoradmin state,orallactoradminstate(s).For
descriptionsofspecificstates,refertotheset portlacpcommand(“set
portlacp”
onpage5‐43).
padminsyspri Clearstheport’sdefaultpartnerpriorityvalue.
padminsysid Clearstheport’sdefaultpartnersystemID.
padminkey Clearstheport’sdefaultpartneradminkey.
padminportpri Clearstheport’sdefaultpartnerportpriority.
padminport DeletesapartnerportfromtheLACPconfiguration.

Enterasys SecureStack C2 Specifications

General

Brand	Enterasys
Model	SecureStack C2
Category	Switch
Language	English