Enterasys SecureStack C2 - Show Vlan Dynamicegress

show vlan dynamicegress
SecureStack C2 Configuration Guide 8-15
Parameters
Defaults
Ifforbiddenisnotspecified,taggedanduntaggedsettingswillbecleared.
Mode
Switchcommand,read‐write.
Examples
Thisexampleshowshowtoremovege.3.14fromtheegresslistofVLAN 9:
C2(su)->clear vlan egress 9 ge.3.14
ThisexampleshowshowtoremoveallGigabitEthernetportsinslot2fromthe egresslistof
VLAN4:
C2(su)->clear vlan egress 4 ge.2.*
show vlan dynamicegress
Usethiscommandtodisplaythestatusofdynamicegress(enabledordisabled)foroneormore
VLANs.
Syntax
show vlan dynamicegress [vlan-list]
Parameters
Defaults
Ifvlan‐listisnotspecified,thedynamicegressstatusforallVLANswillbedisplayed.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtodisplaythedynamicegressstatusforVLANs50‐55:
C2(rw)->show vlan dynamicegress 50-55
VLAN 50 is disabled
vlan‐list SpecifiesthenumberoftheVLANfromwhichaport(s)willberemoved
fromtheegresslist.
port‐string SpecifiesoneormoreportstoberemovedfromtheVLANegresslistofthe
specifiedvlan‐list.Foradetaileddescriptionofpossibleport‐stringvalues,
referto“Port
StringSyntaxUsedintheCLI”onpage 5‐2.
forbidden (Optional)Clearstheforbiddensettingfromthespecifiedport(s)andresets
theport(s)asabletoegressframesifsoconfiguredbyeitherstaticor
dynamicmeans.
vlan‐list (Optional)DisplaysdynamicegressstatusforspecificVLAN(s).