Enterasys SecureStack C2 User Manual

set maclock enable
SecureStack C2 Configuration Guide 18-49
Example
ThisexampleshowshowtodisplayMAClockinginformationfortheendstationsconnectedtoall
GigabitEthernetportsinunit/module2:
C2(su)->show maclock stations ge.2.*
Port Number MAC Address Status State Aging
------------ ----------------- -------------- -------------- -----
ge.2.1 00:a0:c9:39:5c:b4 active first arrival true
ge.2.7 00:a0:c9:39:1f:11 active static false
Table 18‐7providesanexplanationofthecommandoutput.
set maclock enable
UsethiscommandtoenableMAClockinggloballyorononeormoreports.
Syntax
setmaclockenable[port‐string]
Parameters
Defaults
Ifport‐stringisnotspecified,MAClockingwillbeenabledglobally.
Mode
Switchcommand,read‐write.
Usage
Whenenabledandconfigured,MAClockingdefineswhichMACaddresses,aswellashowmany
MACaddressesarepermittedtousespecificport(s).
Table 18-7 show maclock stations Output Details
Output What It Displays...
Port Number Port designation. For a detailed description of possible port-string values, refer to
“Port String Syntax Used in the CLI” on page 5-2.
MAC address MAC address of the end station(s) locked to the port.
Status Whether the end stations are active or inactive.
State Whether the end station locked to the port is a first arrival or static connection.
Aging When true, FirstArrival MACs that have aged out of the forwarding database will be
removed for the associated port lock.
Note: MAC locking needs to be enabled globally and on appropriate ports for it to function.
port‐string (Optional)EnablesMAClockingonspecificport(s).Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntaxUsed
intheCLI”onpage 5‐2. 

Enterasys SecureStack C2 Specifications

General

Brand	Enterasys
Model	SecureStack C2
Category	Switch
Language	English