Enterasys SecureStack C2

set pwa guestname
SecureStack C2 Configuration Guide 18-63
Example
ThisexampleshowshowtosetathePWAprotocoltoCHAP:
C2(su)->set pwa protocol chap
set pwa guestname
UsethiscommandtosetaguestusernameforPWAnetworking.PWAwillusethisnametogrant
networkaccesstoguestswithoutestablishedloginnamesandpasswords.
Syntax
set pwa guestname name
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtosetthePWAguestusernameto“guestuser”:
C2(su)->set pwa guestname guestuser
clear pwa guestname
UsethiscommandtoclearthePWAguestusername.
Syntax
clear pwa guestname
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoclearthePWAguestusername
C2(su)->clear pwa guestname
name Specifiesaguestusername.