Enterasys SecureStack C2

Configuring Spanning Tree Loop Protect Parameters
SecureStack C2 Configuration Guide 7-39
Configuring Spanning Tree Loop Protect Parameters
Purpose
TodisplayandsetSpanningTreeLoopProtectparameters,includingtheglobalparametersof
LoopProtectthreshold,window,enablingtraps,anddisputedBPDUthreshold,aswellasper
portandport/SIDparameters.See“LoopProtect”onpage 7‐2formoreinformationaboutthe
LoopProtectfeature.
Commands
For information about... Refer to page...
set spantree lp 7-40
show spantree lp 7-40
clear spantree lp 7-41
show spantree lplock 7-41
clear spantree lplock 7-42
set spantree lpcapablepartner 7-43
show spantree lpcapablepartner 7-43
clear spantree lpcapablepartner 7-44
set spantree lpthreshold 7-44
show spantree lpthreshold 7-45
clear spantree lpthreshold 7-45
set spantree lpwindow 7-46
show spantree lpwindow 7-46
clear spantree lpwindow 7-47
set spantree lptrapenable 7-47
show spantree lptrapenable 7-48
clear spantree lptrapenable 7-48
set spantree disputedbpduthreshold 7-49
show spantree disputedbpduthreshold 7-50
clear spantree disputedbpduthreshold 7-50
show spantree nonforwardingreason 7-50