Enterasys SecureStack C2

clear rmon capture
SecureStack C2 Configuration Guide 13-21
Defaults
Ifnotspecified,actiondefaultstolock.
Ifnotspecified,offsetdefaultsto0.
Ifnotspecified,asksizedefaultsto‐1(whichwillrequestasmanyoctetsaspossible).
Ifsliceisnotspecified,1 518willbeapplied.
Ifloadsizeisnotspecified,100willbeapplied.
Ifownerisnotspecified,
itwillbesettomonitor.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtocreateRMONcaptureentry1to“listen”onchannel628:
C2(rw)->set rmon capture 1 628
clear rmon capture
UsethiscommandtoclearsanRMONcaptureentry.
Syntax
clear rmon capture index
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
actionlock (Optional)Specifiestheactionofthebufferwhenitisfullas:
• lock‐Packetswillceasetobeaccepted
sliceslice (Optional)Specifiesthemaximumoctetsfromeachpackettobesavedin
abuffer.Currently,theonlyvalueallowedis1518.
loadsizeloadsize (Optional)Specifiesthe
maximumoctetsfromeachpackettobe
downloadedfromthebuffer.Thedefaultis100.
offsetoffset (Optional)Specifiesthefirstoctetfromeachpacketthatwillberetrieved.
asksizeasksize (Optional)Specifiestherequestedmaximumoctetstobesavedinthis
buffer.Currently,theonlyvalueacceptedis‐1,whichrequestsas
many
octetsaspossible.
owner (Optional)Specifiesthenameoftheentitythatconfiguredthisentry.
index Specifiesthecaptureentrytobecleared.