Enterasys SecureStack C2 User Manual

set maclock agefirstarrival
18-54 Security Configuration
Syntax
clear maclock firstarrival port-string
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoresetMACfirstarrivalsonge.2.3:
C2(su)->clear maclock firstarrival ge.2.3
set maclock agefirstarrival
UsethiscommandtoenableordisabletheagingoffirstarrivalMACaddresses.Whenenabled,
firstarrivalMACaddressesthatareagedoutoftheforwardingdatabasewillberemovedfrom
theassociatedportMAClock.
Syntax
set maclock agefirstarrival port-string {enable | disable}
Parameters
Defaults
None.
Mode
Switchmode,read‐write.
Example
Thisexampleenablesfirstarrivalagingonportge.1.1.
C2(su)-> set maclock agefirstarrival ge.1.1 enable
port‐string Specifiestheportonwhichtoresetthefirstarrivalvalue.Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntaxUsed
intheCLI”onpage 5‐2.
port‐string Specifiestheport(s)onwhichtoenableordisablefirstarrivalaging.For
adetaileddescriptionofpossibleport‐stringvalues,referto“PortString
SyntaxUsedintheCLI”onpage 5‐2.
enable|disable Enableordisablefirstarrivalaging.Bydefault,firstarrivalagingis
disabled.

Enterasys SecureStack C2 Specifications

General

Brand	Enterasys
Model	SecureStack C2
Category	Switch
Language	English