Enterasys SecureStack C2 User Manual

show cos port-type
SecureStack C2 Configuration Guide 9-31
show cos port-type
UsethiscommandtodisplayClassofServiceporttypeconfigurations.
Syntax
show cos port-type [irl [port-type]]
Parameters
Defaults
Ifnoparametersarespecified,inboundratelimitinginformationforallporttypesisdisplayed.
Mode
Switchcommand,read‐only.
Usage
TheC2implementationprovidesonedefaultporttype(0)fordesignatingavailableinboundrate
limitingresources.Porttype0includesallports.
Theporttype0descriptionis“C2100IRL,”whichindicatesthatthisporttypeprovidesa
maximumof100inboundratelimitingresourcesperportgroup.
irl (Optional)Displaysinbound
ratelimitinginformation.
port‐type (Optional)Displaysinformationforaspecificporttype.

Enterasys SecureStack C2 Specifications

General

Brand	Enterasys
Model	SecureStack C2
Category	Switch
Language	English