Enterasys SecureStack C2

show lldp port local-info
4-18 Discovery Protocol Configuration
Parameters
Defaults
Ifport‐stringisnotspecified,portlocationconfigurationinformationwillbedisplayedforall
ports.
Mode
Switchcommand,read‐only.
Example
Thisexampleshowshowtodisplayportlocationinformationforthreeports.
C2(ro)->show lldp port location-info ge.1.1-3
Ports Type Location
-------- ------------- -------------------------
ge.1.1 ELIN 1234567890
ge.1.2 ELIN 1234567890
ge.1.3 ELIN 1234567890
show lldp port local-info
Usethiscommandtodisplaythelocalsysteminformat ionstoredforoneormoreports.Youcan
usethisinformationtodetectmisconfigurationsorincompatibilitiesbetweenthelocalportand
theattachedendpointdevice(remoteport).
Syntax
show lldp port local-info [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,localsysteminformationwillbedisplayedforallports.
Mode
Switchcommand,read‐only.
port‐string (Optional)Displaysportlocationinformationforoneorarangeof
ports.
port‐string (Optional)Displayslocalsysteminformationforoneorarangeof
ports.