Enterasys SecureStack C2

set snmp group
6-12 SNMP Configuration
set snmp group
UsethiscommandtocreateanSNMPgroup.ThisassociatesSNMPv3userstoagroupthatshares
commonaccessprivileges.
Syntax
set snmp group groupname user user security-model {v1 | v2c | usm} [volatile |
nonvolatile]
Parameters
Defaults
Ifstoragetypeisnotspecified,nonvolatilestoragewillbeapplied.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtocreateanSNMPgroupcalled“anyone”,assignausernamed“public”
andassignSNMPv3securitytothegroup:
C2(su)->set snmp group anyone user public security-model usm
clear snmp group
UsethiscommandtoclearSNMPgroupsettingsgloballyorforaspecificSNMPgroupanduser.
Syntax
clear snmp group groupname user [security-model {v1 | v2c | usm}]
Parameters
Defaults
If not specified, settings related to all security models will be cleared.
Mode
Switchcommand,read‐write.
groupname SpecifiesanSNMPgroupnametocreate.
useruser SpecifiesanSNMPv3usernametoassigntothegroup.
security‐modelv1|
v2c|usm
SpecifiesanSNMPsecuritymodeltoassigntothegroup.
volatile|
nonvolatile
(Optional)SpecifiesastoragetypeforSNMPentriesassociatedwiththe

group.
groupname SpecifiestheSNMPgrouptobecleared.
user SpecifiestheSNMPusertobecleared.
security‐modelv1|
v2c|usm
(Optional)Clearsthesettingsassociatedwithaspecificsecuritymodel.