To Next Page

To Previous Page

clear maclock agefirstarrival

SecureStack C2 Configuration Guide 18-55

clear maclock agefirstarrival

Usethiscommandtoresetfirstarrivalagingononeormoreportstoitsdefaultstateofdisabled.

Syntax

clear maclock agefirstarrival port-string

Parameters

Defaults

None.

Mode

Switchmode,read‐write.

Example

Thisexampledisablesfirstarrivalagingonportge.1.1.

C2(su)-> clear maclock agefirstarrival ge.1.1 enable

set maclock move

UsethiscommandtomoveallcurrentfirstarrivalMACstostaticentries.

Syntax

set maclock move port-string

Parameters

Defaults

None.

Mode

Switchcommand,read‐write.

Usage

IftherearemorefirstarrivalMACsthantheallowedmaximumstaticMACs,thenonlythelatest

firstarrivalMACswillbemovedtostaticentries.Forexample,ifyousetthemaximumnumberof

staticMACsto2withthesetmaclockstaticcommand,andthenexecutedthesetmaclock

move

command,eventhoughtherewerefiveMACsinthefirstarrivaltable,onlythetwomostrecent

MACentrieswouldbemovedtostaticentries.

port‐string Specifiestheport(s)onwhichtodisablefirstarrivalaging.Fora

detaileddescriptionofpossibleport‐stringvalues,referto“PortString

SyntaxUsedintheCLI”onpage 5‐2.

port‐string SpecifiestheportonwhichMACwillbemovedfromfirstarrivalMACs

tostaticentries.Foradetaileddescriptionofpossibleport‐stringvalues,

referto“PortStringSyntaxUsedintheCLI”onpage 5‐2.

Enterasys SecureStack C2 User Manual

Questions and Answers: