Enterasys SecureStack C2

set sntp poll-retry
12-30 Logging and Network Management
set sntp poll-retry
UsethiscommandtosetthenumberofpollretriestoaunicastSNTPserver.
Syntax
set sntp poll-retry retry
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtosetthenumberofSNTPpollretriesto5:
C2(su)->set sntp poll-retry 5
clear sntp poll-retry
UsethiscommandtoclearthenumberofpollretriestoaunicastSNTPserver.
Syntax
clear sntp poll-retry
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoclearthenumberofSNTPpollretries:
C2(su)->clear sntp poll-retry
retry Specifies thenum berofretries.Validvaluesare0to10.