Enterasys SecureStack C2 User Manual

show port counters
5-6 Port Configuration
Examples
Thisexampleshowshowtodisplayallcounterstatistics,includingMIB2networktrafficand
trafficthroughthedevicefor
ge.3.1:
C2(su)->show port counters ge.3.1
Port: ge.3.1 MIB2 Interface: 1
No counter discontinuity time
-----------------------------------------------------------------
MIB2 Interface Counters
-----------------------
In Octets 0
In Unicast Pkts 0
In Multicast Pkts 0
In Broadcast Pkts 0
In Discards 0
In Errors 0
Out Octets 0
Out Unicasts Pkts 0
Out Multicast Pkts 0
Out Broadcast Pkts 0
Out Errors 0
802.1Q Switch Counters
----------------------
Frames Received 0
Frames Transmitted 0
Thisexampleshowshowtodisplayallge.3.1portcounterstatisticsrelatedtotrafficthroughthe
device.
C2(su)->show port counters ge.3.1 switch
Port: ge.3.1 Bridge Port: 2
802.1Q Switch Counters
-----------------------
Frames Received 0
Frames Transmitted 0
Table 5‐2providesanexplanationofthecommandoutput.
Table 5-2 show port counters Output Details
Output What It Displays...
Port Port designation. For a detailed description of possible port-string values, refer to
“Port String Syntax Used in the CLI” on page 5-2.
MIB2 Interface MIB2 interface designation.
Bridge Port IEEE 802.1D bridge port designation.
MIB2 Interface
Counters
MIB2 network traffic counts
802.1Q Switch
Counters
Counts of frames received, transmitted, and filtered.

Enterasys SecureStack C2 Specifications

General

Brand	Enterasys
Model	SecureStack C2
Category	Switch
Language	English