Enterasys SecureStack C2 User Manual

show policy capability
9-8 Policy Classification Configuration
show policy capability
Usethiscommandtodisplaydetailedpolicyclassificationcapabilitiessupportedbyyour
SecureStackC2device.
Syntax
show policy capability
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Usage
Usethiscommandtodisplaydetailedpolicyclassificationcapabilitiessupportedbyyour
SecureStackC2device.Theoutputofthiscommandshowsatablelistingclassifiabletraffic
attributesandthetypeofactions,byruletype,thatcanbeexecutedrelativetoeachattribute.
Abovethetableisalistofall
theactionspossibleonthisdevice.
Theleft‐mostcolumnofthetablelistsallpossibleclassifiabletrafficattributes.Thenexttwo
columnsfromtheleftindicatehowpolicyprofilesmaybeassigned,eitheradministrativelyor
dynamically.Thenextfourcolumnsfromtheleftindicatetheactionsthatmaybeperformed.
The
lastthreecolumnsindicateauditingoptions.
Anxinanactioncolumnforatrafficattributerowindicatesthatyoursystemhasthecapabilityto
performthatactionfortrafficclassifiedbythatattribute.
VLAN VLAN ID to which this rule applies and whether or not matching packets will be
dropped or forwarded.
CoS If applicable, Class of Service value to which this rule applies. (Not supported on B3,
C3, and G3 devices.)
U Whether or not this rule has been used.
dPID Whether or not this is a dynamic profile ID.
aPID Whether or not this is an administrative profile ID.
Table 9-2 show policy rule Output Details (Continued)
Output What It Displays...

Enterasys SecureStack C2 Specifications

General

Brand	Enterasys
Model	SecureStack C2
Category	Switch
Language	English