Enterasys SecureStack C2

clear port protected
5-48 Port Configuration
Example
Thisexampleshowshowtodisplayinformationaboutallprotectedports:
C2(ro)->show port protected
Group id Port
----------------------
1 ge.1.1
1 ge.1.2
1 ge.1.3
clear port protected
Usethiscommandtoremoveaportorgroupfromprotectedmode.
Syntax
clear port protected [port-string] | [group-id]
Parameters
Defaults
Ifnoparametersareentered,allprotectedportsandgroupsarecleared.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtoclearprotectedportsge.1.1throughge.1.3:
C2(rw)->clear port protected ge.1.1-3
set port protected name
Usethiscommandtoassignanametoaprotectedportgroupid.
Syntax
set port protected name group-id name
Parameters
Defaults
None.
port‐string (Optional)Specifiestheportorportstoremovefromprotectedmode.
group‐id (Optional)Specifiestheidofthegrouptoremovefromprotectedmode.
Idcanrangefrom0to2.
group‐id Specifiestheidofthisgroup.Idcanrangefrom0to2.
name Specifiesanameforthegroup.Thenamecanbeupto32charactersin
length.