Enterasys SecureStack C2 User Manual

show mac unreserved-flood
12-24 Logging and Network Management
show mac unreserved-flood
Usethiscommandtodisplaythestateofmulticastfloodprotection.
Syntax
show mac unreserved-flood
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampledisplaysthestatusofmulticastfloodprotection.
C2(su)->show mac unreserved-flood
mac unreserved flood is disabled.
set mac unreserved-flood
Usethiscommandtoenableordisablemulticastfloodprotection.Whenenabled,thisprevents
policyprofilesrequiringafull10masksfrombeingloaded.
Syntax
set mac unreserved-flood {disable | enable}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Usage
Thefollowingaddresseswillbeforwardedwhenthisfunctionisenabled:
01:80:C2:00:00:11
01:80:C2:00:00:14
01:80:C2:00:00:15
Thedefaultstateisdisabled,andtheseaddresseswillnotbeforwarded.
disable|enable Disablesorenablesmulticastfloodprotection.

Enterasys SecureStack C2 Specifications

General

Brand	Enterasys
Model	SecureStack C2
Category	Switch
Language	English