Enterasys SecureStack C2 User Manual

save config
3-38 Basic Configuration
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtosettheconfigurationpersistencemodetomanual:
C2(su)->set snmp persistmode manual
save config
Usethiscommandtosavetherunningconfiguration.Ifapplicable,thiscommandwillsavethe
configurationtoallswitchmembersinastack.
Syntax
save config
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtosavetherunningconfiguration:
C2(su)->save config
dir
Usethiscommandtolistconfigurationandima gefilesstoredinthefilesystem.
Syntax
dir [filename]
Parameters
Defaults
Iffilenameisnotspecified,allfilesinthesystemwillbedisplayed.
Mode
Switchcommand,read‐only.
filename (Optional)Specifiesthefilenameordirectorytolist.

Enterasys SecureStack C2 Specifications

General

Brand	Enterasys
Model	SecureStack C2
Category	Switch
Language	English