Enterasys SecureStack C2

show system utilization
SecureStack C2 Configuration Guide 3-13
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Example
Thisexampleshowshowtodisplaythesystem’shardwareconfiguration.Pleasenotethatthe
informationyouseedisplayedmaydifferfromthisexample.
C2(su)->show system hardware
SLOT HARDWARE INFORMATION
--------------------
Model: C2G124-24
Serial Number: 041800129041
Vendor ID: 0x0e10
Base MAC Address: 00:01:F4:5F:1D:E0
Hardware Version: BCM56504 REV 19
FirmWare Version: 5.1.xx
Boot Code Version: 01.00.17
show system utilization
Usethiscommandtodisplaydetailedinformationabouttheprocessorrunningontheswitch,or
theoverallmemoryusageoftheFlashandSDRAMstoragedevicesontheunit,orthe processes
runningontheswitch.
Syntax
show system utilization {cpu | storage | process}
Parameters
Defaults
None.
Mode
Switchcommand,read‐only.
cpu Displayinformationabouttheprocessor runningontheswitch.
storage Displayinformationaboutthe overallmemoryusageontheswitch.
process Displayinformationaboutthe processesrunningontheswitch.