Enterasys SecureStack C2

set ssh
SecureStack C2 Configuration Guide 18-69
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Example
ThisexampleshowshowtodisplaySSHstatusonthesw itch:
C2(su)->show ssh status
SSH Server status: Disabled
set ssh
Usethiscommandtoenable,disableorreinitializeSSHserverontheswitch.Bydefault,theSSH
serverisdisabled.
Syntax
set ssh {enable | disable | reinitialize}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtodisableSSH:
C2(su)->set ssh disable
set ssh hostkey
UsethiscommandtosetorreinitializenewSSHauthenticationkeys.
Syntax
set ssh hostkey [reinitialize]
Parameters
enable|disable EnablesordisablesSSH,orreinitializestheSSHserver.
reinitialize Reinitializesthe SSHserver.
reinitialize (Optional)Reinitializestheserverhostauthenticationkeys.