Enterasys SecureStack C2 User Manual

set macauthentication
18-22 Security Configuration
Example
ThisexampleshowshowtodisplayMACsessioninformation:
C2(su)->show macauthentication session
Port MAC Address Duration Reauth Period Reauthentications
----- ----------------- ---------- ------------- -----------------
ge.1.2 00:60:97:b5:4c:07 0,00:52:31 3600 disabled
Table 18‐4providesanexplanationofthecommandoutput.
set macauthentication
UsethiscommandtogloballyenableordisableMACauthentication.
Syntax
set macauthentication {enable | disable}
Parameters
Mode
Switchcommand,read‐write.
Defaults
None.
Example
ThisexampleshowshowtogloballyenableMACauthentication:
C2(su)->set macauthentication enable
set macauthentication password
UsethiscommandtosetaMACauthenticationpassword.
Table 18-4 show macauthentication session Output Details
Output What It Displays...
Port Port designation. For a detailed description of possible port-string values, refer to
“Port String Syntax Used in the CLI” on page 5-2.
MAC Address MAC address associated with the session.
Duration Time this session has been active.
Reauth Period Reauthentication period for this port, set using the set macauthentication
reauthperiod command described in “set macauthentication reauthperiod” on
page 18-28.
Reauthentications Whether or not reauthentication is enabled or disabled on this port. Set using the set
macauthentication reauthentication command described in “set
macauthentication reauthentication” on page 18-26.
enable|disable GloballyenablesordisablesMACauthentication.

Enterasys SecureStack C2 Specifications

General

Brand	Enterasys
Model	SecureStack C2
Category	Switch
Language	English