Enterasys SecureStack C2

show cos unit
9-30 Policy Classification Configuration
show cos unit
UsethiscommandtoshowpossibleCoSunitentries.
Syntax
show cos unit
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Example
Thisexampleshowspossibleunitentriesforinboundratelimiting:
C2(su)->show cos unit
Type: Unit:
irl = inbound rate limiting Kbps = Kilobits per second
Port Type Type Unit Maximum Rate Minimum Rate Granularity
--------- ---- ---- ------------ ------------ -----------
0 irl Kbps 1000000 512 1
clear cos all-entries
UsethiscommandtoclearallClassofServiceentriesexceptentries0‐7.
Syntax
clear cos all-entries
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtocleartheCoSconfigurationforallentriesexceptentries0‐7:
C2(su)->clear cos all-entries