Enterasys SecureStack C2

show dhcp pool configuration
SecureStack C2 Configuration Guide 14-29
Mode
Switchcommand,read‐write.
Example
Thisexampleremovesoption19fromaddresspool“auto1.”
C2(rw)->clear dhcp pool auto1 option 19
show dhcp pool configuration
Usethiscommandtodisplayconfigurationinformationforoneoralladdresspools.
Syntax
show dhcp pool configuration {poolname | all}
Parameters
Defaults
None.
Mode
Read‐only.
Example
Thisexampledisplaysconfigurationinformationforalladdresspools.
C2(rw)->show dhcp pool configuration all
Pool: Atg_Pool
Pool Type Dynamic
Network 192.0.0.0 255.255.255.0
Lease Time 1 days 0 hrs 0 mins
Default Routers 192.0.0.1
Pool: static1
Pool Type Manual
Client Name appsvr1
Client Identifier 01:00:01:f4:01:27:10
Host 10.1.1.1 255.0.0.0
Lease Time infinite
Option 19 hex 01
Pool: static2
Pool Type Manual
Hardware Address 00:01:f4:01:27:10
Hardware Address Type ieee802
Host 192.168.10.1 255.255.255.0
Lease Time infinite
poolname Specif iesthenameoftheaddresspool.Poolnamesmaybeupto31
charactersinlength.