Enterasys SecureStack C2

show port lacp
5-42 Port Configuration
Parameters
Defaults
None.
Mode
Switchcommand,read‐only.
Usage
Statedefinitions,suchasActorAdminStateandPartnerAdminState,areindicatedwithletter
abbreviations.Iftheshowportlacpcommanddisplaysoneormoreofthefollowingletters,it
meansthestateistruefortheassociatedactororpartnerports:
• E=Expired
• F=Defaulted
• D=Distributing(tx
enabled)
• C=Collecting(rxenabled)
• S=Synchronized(actorandpartneragree)
• G=Aggregationallowed
• S/l=Short/LongLACPtimeout
• A/p=Active/PassiveLACP
Formoreinformationaboutthesestates,refertosetportlacp(page 5 ‐43)andtheIEEE802.32002
specification.
Examples
ThisexampleshowshowtodisplaydetailedLACPstatusinformationforportge.1.12:
C2(su)-> show port lacp port ge.1.12 status detail
Port Instance: ge.1.12
ActorPort: 1411 PartnerAdminPort: 1411
ActorSystemPriority: 32768 PartnerOperPort: 1411
ActorPortPriority: 32768 PartnerAdminSystemPriority: 32768
ActorAdminKey: 32768 PartnerOperSystemPriority: 32768
ActorOperKey: 32768 PartnerAdminPortPriority: 32768
ActorAdminState: -----GlA PartnerOperPortPriority: 32768
ActorOperState: -F----lA PartnerAdminKey: 1411
ActorSystemID: 00-e0-63-9d-b5-87 PartnerOperKey: 1411
SelectedAggID: none PartnerAdminState: --DCSGlp
AttachedAggID: none PartnerOperState: --DC-Glp
MuxState: Detached PartnerAdminSystemID: 00-00-00-00-00-00
DebugRxState: port Disabled PartnerOperSystemID: 00-00-00-00-00-00
portport‐string DisplaysLACPinformationforspecificport(s).Foradetaileddescription
ofpossibleport‐stringvalues,referto“PortStringSyntaxUsedintheCLI”
onpage5‐2.
statusdetail|
summary
DisplaysLACPstatusindetailedorsummaryinformation.
counters DisplaysLACPcounterinformation.