Enterasys SecureStack C2 User Manual

show dot1x auth-config
18-12 Security Configuration
Parameters
Defaults
Ifnoparametersarespecified,all802.1Xsettingswillbedisplayed.
Ifport‐stringisnotspecified,informationforallportswillbedisplayed.
Mode
Switchcommand,read‐only.
Examples
ThisexampleshowshowtodisplaytheEAPOLportcontrolmodeforge.1.1:
C2(su)->show dot1x auth-config authcontrolled-portcontrol ge.1.1
Port 1: Auth controlled port control: Auto
Thisexampleshowshowtodisplaythe802.1Xquietperiodsettingsforge.1.1:
C2(su)->show dot1x auth-config quietperiod ge.1.1
Port 1: Quiet period: 30
Thisexampleshowshowtodisplayall802.1Xauthenticationconfigurationset tingsforge.1.1:
C2(ro)->show dot1x auth-config ge.1.1
Port : 1 Auth-Config
PAE state: Initialize
Backend auth state: Initialize
Admin controlled directions: Both
Oper controlled directions: Both
Auth controlled port status: Authorized
Auth controlled port control: Auto
Quiet period: 60
Transmission period: 30
Supplicant timeout: 30
authcontrolled‐
portcontrol
(Optional)DisplaysthecurrentvalueofthecontrolledPortcontrol
parameterfortheport.
maxreq (Optional)Displaysthevaluesetformaximumrequestscurrentlyinuseby
thebackendauthenticationstatemachine.
quietperiod (Optional)Displaysthevaluesetforquietperiod currentlyinusebythe
authenticatorPAEstatemachine.
reauthenabled (Optional)
Displaysthestateofreauthenticationcontrolusedbythe
ReauthenticationTimerstatemachine.
reauthperiod (Optional)Displaysthevalue,inseconds,setforthereauthentication
periodusedbythereauthenticationtimerstatemachine.
servertimeout (Optional)Displaystheservertimeoutvalue,inseconds,currentlyinuse
bythebackendauthenticationstatemachine.
supptimeout (Optional)Displaysthe
authenticationsupplicanttimeoutvalue,in
seconds,currentlyinusebythebackendauthenticationstatemachine.
txperiod (Optional)Displaysthetransmissionperiodvalue,inseconds,currentlyin
usebytheauthenticatorPAEstatemachine.
port‐string (Optional)Limitsthedisplayofdesiredinformationinformationtospecific
port(s).Foradetaileddescriptionofpossible
port‐stringvalues,referto
“PortStringSyntaxUsedintheCLI”onpage 5‐2.

Enterasys SecureStack C2 Specifications

General

Brand	Enterasys
Model	SecureStack C2
Category	Switch
Language	English