xxviii Sun Blade 1500 Service, Diagnostics, and Troubleshooting Manual • December 2004
FIGURE 14-10 Connecting the Interface Cable to the Hard Drive(s) 14–12
FIGURE 14-11 IDE Power Cable Connections 14–14
FIGURE 14-12 Disconnecting the IDE Power Cable From the Hard Drive(s) 14–15
FIGURE 14-13 Disconnecting the IDE Power Cable From the Optical Drive 14–15
FIGURE 14-14 Connecting the IDE Power Cable to the Optical Drive 14–16
FIGURE 14-15 Connecting the IDE Power Cable to the Hard Drive(s) 14–17
FIGURE 14-16 Power Switch Assembly Location and Identification 14–18
FIGURE 14-17 Removing the Power Switch Assembly Cable From the Bezel Cable Clip and Metal
Clamp 14–19
FIGURE 14-18 Removing the Power Switch Assembly 14–20
FIGURE 14-19 Routing the Power Switch Assembly Cable 14–21
FIGURE 14-20 Securing the Power Switch Assembly Cable to the Bezel Cable Clip and Metal Clamp 14–22
FIGURE 14-21 Audio USB Board Cable Connections 14–24
FIGURE 14-22 Removing Audio and USB Cables From the Motherboard 14–25
FIGURE 14-23 Removing the Audio USB Cables From the I/O Cable Clip 14–26
FIGURE 14-24 Disconnecting Cables From the Audio USB Board 14–27
FIGURE 14-25 Connecting Cables to the Audio USB Board 14–28
FIGURE 14-26 Connecting the Audio and USB Cables to the Motherboard 14–29
FIGURE 14-27 Securing the Audio USB Cables to the I/O Cable Clip 14–30
FIGURE 15-1 Positioning the Chassis Upright 15–2
FIGURE 15-2 Locating Bezel Short Tabs 15–3
FIGURE 15-3 Aligning the Bezel 15–4
FIGURE 15-4 Securing the Bezel 15–4
FIGURE 15-5 Aligning the Access Panel 15–6
FIGURE 15-6 Closing the Access Panel 15–7
FIGURE 15-7 Tightening the Access Panel Thumbscrews 15–7
FIGURE 15-8 Reconnecting the Keyboard, Mouse, Monitor, and Network Connections 15–9
FIGURE 15-9 Reconnecting the Power Cord 15–10
FIGURE 15-10 Powering Up the Workstation 15–11
FIGURE B-1 IEEE 1394A Port B–2
To Next Page
Loading...
