AT-9000 Switch Command Line User’s Guide
1023
NO SNMP-SERVER ENABLE TRAP
Syntax
no snmp-server enable trap
Parameters
None
Mode
Global Configuration mode
Description
Use this command to disable the transmission of SNMP traps, except for
the link status and authentication traps, which are disabled separately.
Confirmation Command
“SHOW RUNNING-CONFIG SNMP” on page 1029
Example
This example disables the transmission of all SNMP traps, except for the
link status and authentication traps:
awplus> enable
awplus# configure terminal
awplus(config)# no snmp-server enable trap
To Next Page
Loading...
