Chapter 14: IPv4 and IPv6 Management Address Commands
314
NO IP ROUTE
Syntax
no ip route 0.0.0.0/0
ipaddress
Parameters
ipaddress
Specifies the current default gateway.
Mode
Global Configuration mode
Description
Use this command to delete the current IPv4 default gateway. The
command must include the current default gateway.
Confirmation Command
“SHOW IP ROUTE” on page 318
Example
This example deletes the default route 121.114.17.28 from the switch:
awplus> enable
awplus# configure terminal
awplus(config)# no ip route 0.0.0.0/0 121.114.17.28
To Next Page
Loading...
Need help?
General
