Allied Telesis AT-9000 Series - Chapter 66: Snmpv3 Commands; Table 92. Snmpv3 Commands

1043
Chapter 66
SNMPv3 Commands
The SNMPv3 commands are summarized in Table 92 and described in
detail within the chapter.
Table 92. SNMPv3 Commands
Command Mode Description
“NO SNMP-SERVER” on page 1045 Global
Configuration
Disables SNMPv1, v2c and v3 on the
switch.
“NO SNMP-SERVER ENGINEID
LOCAL” on page 1046
Global
Configuration
Returns the SNMP engine ID value to
the default value:
“NO SNMP-SERVER GROUP” on
page 1047
Global
Configuration
Deletes SNMPv3 groups from the
switch.
“NO SNMP-SERVER HOST” on
page 1048
Global
Configuration
Deletes SNMPv3 host entries.
“NO SNMP-SERVER USER” on
page 1050
Global
Configuration
Deletes SNMPv3 users from the
switch.
“NO SNMP-SERVER VIEW” on
page 1051
Global
Configuration
Deletes SNMPv3 views from the
switch.
“SHOW SNMP-SERVER” on
page 1052
Privileged Exec Displays the current status of SNMP
on the switch.
“SHOW SNMP-SERVER GROUP” on
page 1053
Privileged Exec Displays the SNMPv3 groups.
“SHOW SNMP-SERVER HOST” on
page 1054
Privileged Exec Displays SNMPv3 host entries.
“SHOW SNMP-SERVER USER” on
page 1055
Privileged Exec Displays SNMPv3 users.
“SHOW SNMP-SERVER VIEW” on
page 1056
Privileged Exec Displays SNMPv3 views.
“SNMP-SERVER” on page 1057 Global
Configuration
Activates SNMPv1, v2c and v3 on the
switch.
“SNMP-SERVER ENGINEID LOCAL”
on page 1058
Global
Configuration
Configures the SNMPv3 engine ID.