AT-9000 Switch Command Line User’s Guide
1465
NO TACACS-SERVER HOST
Syntax
no tacacs-server host
ipaddress
Parameter
ipaddress
Specifies an IP address of a TACACS+ server to be deleted from
the TACACS+ client. You can delete just one address at a time
with this command.
Mode
Global Configuration mode
Description
Use this command to delete IP addresses of TACACS+ servers from the
client. You can delete only one IP address at a time with this command.
Confirmation Command
“SHOW TACACS” on page 1472
Example
This example removes the IP address 152.112.12.7 from the TACACS+
client:
awplus> enable
awplus# configure terminal
awplus(config)# no tacacs-server host 152.112.12.7
To Next Page
Loading...
