1491
Appendix B
Management Software Default Settings
This appendix lists the factory default settings of the switch. The features
are listed in alphabetical order:
“Boot Configuration File” on page 1492
“Class of Service” on page 1493
“Console Port” on page 1494
“802.1x Port-Based Network Access Control” on page 1495
“Enhanced Stacking” on page 1497
“GVRP” on page 1498
“IGMP Snooping” on page 1499
“Link Layer Discovery Protocol (LLDP and LLDP-MED)” on page 1500
“MAC Address-based Port Security” on page 1501
“MAC Address Table” on page 1502
“Management IP Address” on page 1503
“Manager Account” on page 1504
“Port Settings” on page 1505
“RADIUS Client” on page 1506
“Remote Manager Account Authentication” on page 1507
“RMON” on page 1508
“Secure Shell Server” on page 1509
“sFlow Agent” on page 1510
“Simple Network Management Protocol (SNMPv1, SNMPv2c and
SNMPv3)” on page 1511
“Simple Network Time Protocol” on page 1512
“Spanning Tree Protocols (STP, RSTP and MSTP)” on page 1513
“System Name” on page 1515
“TACACS+ Client” on page 1516
“Telnet Server” on page 1517
“VLANs” on page 1518
“Web Server” on page 1519