Chapter 72: Address Resolution Protocol (ARP) Commands
1192
ARP
Syntax
arp
ipaddress macaddress port_number
Parameters
ipaddress
Specifies the IP address of the host.
macaddress
Specifies the MAC address of the host. The MAC address must be
entered in one of the following formats:
xx:xx:xx:xx:xx:xx
or
zzzz.zzzz.zzzz
port_number
Specifies the port number associated with the IP address.
Mode
Global Configuration mode
Description
Use this command to add the static ARP entry of a host to the ARP cache.
The ARP entry must not already exist in the ARP cache. The switch can
support up to 1024 static ARP entries.
The switch must have a management IP address to support static
ARP entries. The IP addresses of the ARP entries must be
members of the same subnet as the management IP address. To
assign an management IP address to the switch, refer to Chapter
13, “IPv4 and IPv6 Management Addresses” on page 285.
Confirmation Command
“SHOW ARP” on page 1196
To Next Page
Loading...
Need help?
General
