559
Chapter 35
Event Log Commands
The event log commands are summarized in Table 51 and described in
detail within this chapter.
Table 51. Event Log Commands
Command Mode Description
“CLEAR LOG BUFFERED” on
page 560
Privileged Exec Deletes all entries in the event log.
“LOG BUFFERED” on page 561 Global
Configuration
Specifies the types of event messages
to be stored in the event log.
“NO LOG BUFFERED” on page 563 Global
Configuration
Cancels the settings set by the LOG
BUFFERED command.
“SHOW LOG” on page 565 Privileged Exec Displays the event messages in the
buffered log from oldest to newest.
“SHOW LOG CONFIG” on page 568 Privileged Exec Displays the configuration of the event
logs.
“SHOW LOG REVERSE” on
page 570
Privileged Exec Displays the event messages in the
buffered log from newest to oldest.
“SHOW LOG TAIL” on page 571 Privileged Exec Displays a limited number of the event
messages in the buffered log.
To Next Page
Loading...
Need help?
General
