Allied Telesis AT-9000 Series User Manual

Chapter 4: Basic Command Line Management Commands
98
QUIT
Syntax
quit
Parameters
None
Mode
All modes except the User Exec and Privileged Exec modes.
Description
Use this command to move up one mode in the mode hierarchy. This
command is almost identical to the EXIT command. The difference is that
unlike the EXIT command, the QUIT command cannot be used to end a
management session.
Example
This example uses the QUIT command to return to the Privileged Exec
mode from the Global Configuration mode:
awplus(config)# quit
awplus#

Allied Telesis AT-9000 Series Specifications

General

Brand	Allied Telesis
Model	AT-9000 Series
Category	Switch
Language	English