1191
Chapter 72
Address Resolution Protocol (ARP)
Commands
The ARP commands are summarized in Table 112 and described in detail
within the chapter.
Table 112. ARP Commands
Command Mode Description
“ARP” on page 1192 Global
Configuration
Adds static ARP entries to the ARP
cache.
“CLEAR ARP-CACHE” on page 1194 User Exec and
Privileged Exec
Deletes all dynamic ARP entries from
the ARP cache.
“NO ARP (IP ADDRESS)” on
page 1195
Global
Configuration
Deletes a static ARP entry from the
ARP cache.
“SHOW ARP” on page 1196 User Exec and
Privileged Exec
Displays the static and dynamic ARP
entries in the ARP cache.
To Next Page
Loading...
