Allied Telesis AT-9000 Series - Chapter 24: Port Mirror Commands; Table 39. Port Mirror Commands

459
Chapter 24
Port Mirror Commands
The port mirror commands are summarized in Table 39.
Table 39. Port Mirror Commands
Command Mode Description
“MIRROR” on page 460 Port Interface Designates the destination port for
access control lists that use the copy-
to-mirror action.
“MIRROR INTERFACE” on page 461 Port Interface Creates the port mirror and adds ports
to the port mirror.
“NO MIRROR INTERFACE” on
page 463
Port Interface Removes source ports from the port
mirror and deletes the port mirror.
“SHOW MIRROR” on page 464 Privileged Exec Displays the destination port and
source ports of the port mirror.