Allied Telesis AT-9000 Series User Manual

1451
Chapter 91
RADIUS and TACACS+ Client
Commands
The commands for the RADIUS and TACACS+ clients are summarized in
Table 155 and described in detail within the chapter.
Table 155. RADIUS and TACACS+ Client Commands
Command Mode Description
“AAA ACCOUNTING LOGIN” on
page 1453
Global
Configuration
Configures RADIUS or TACACS+
accounting for login shell session.
“AAA AUTHENTICATION ENABLE
(TACACS+)” on page 1455
Global
Configuration
Enables the TACACS+ password on
the switch.
“AAA AUTHENTICATION LOGIN” on
page 1457
Global
Configuration
Enables RADIUS or TACACS+ on the
switch globally.
“IP RADIUS SOURCE-INTERFACE”
on page 1459
Global
Configuration
Configures the RADIUS source IP
address interface.
“LOGIN AUTHENTICATION” on
page 1461
Console Line
and Virtual
Terminal Line
Activates remote authentication for
local management sessions and
remote Telnet and SSH sessions.
“NO LOGIN AUTHENTICATION” on
page 1463
Console Line
and Virtual
Terminal Line
Deactivates remote authentication for
local management sessions and
remote Telnet and SSH sessions.
“NO RADIUS-SERVER HOST” on
page 1464
Global
Configuration
Deletes IP addresses of RADIUS
servers from the list of authentication
servers in the RADIUS client.
“NO TACACS-SERVER HOST” on
page 1465
Global
Configuration
Deletes IP addresses of TACACS+
servers from the list of authentication
servers in the TACACS+ client.
“RADIUS-SERVER HOST” on
page 1466
Global
Configuration
Adds IP addresses of RADIUS
servers to the RADIUS client for
remote authentication and accounting.
“RADIUS-SERVER KEY” on
page 1468
Global
Configuration
Specifies the global encryption key of
the RADIUS servers.

Allied Telesis AT-9000 Series Specifications

General

Brand	Allied Telesis
Model	AT-9000 Series
Category	Switch
Language	English