Allied Telesis AT-9000 Series User Manual

Chapter 91: RADIUS and TACACS+ Client Commands
1464
NO RADIUS-SERVER HOST
Syntax
no radius-server host ipaddress
Parameter
ipaddress
Specifies an IP address of a RADIUS server to be deleted from the
authentication server list.
Mode
Global Configuration mode
Description
Use this command to delete IP addresses of RADIUS servers from the list
of authentication servers on the switch. You can delete only one IP
address at a time with this command.
Confirmation Command
“SHOW RADIUS” on page 1470
Example
This example removes the IP address 122.34.122.47 from the list of
RADIUS servers:
awplus> enable
awplus# configure terminal
awplus(config)# no radius-server host 122.34.122.47

Allied Telesis AT-9000 Series Specifications

General

Brand	Allied Telesis
Model	AT-9000 Series
Category	Switch
Language	English