AT-9000 Switch Command Line User’s Guide
241
STORM-CONTROL
Syntax
storm-control broadcast|multicast|dlf level
value
Parameters
broadcast
Specifies broadcast packets.
multicast
Specifies multicast packets.
dlf
Specifies unknown unicast packets.
level
Specifies the maximum number of ingress packets per second of
the designated type the port will forward. The range is 0 to
33,554,431 packets.
Mode
Port Interface mode
Description
Use this command to set maximum thresholds for the ingress packets on
the ports. Ingress packets that exceed the thresholds are discarded by the
ports. Thresholds can be set independently for broadcast packets,
multicast packets, and unknown unicast packets. To view the current
thresholds of the ports, refer to “SHOW RUNNING-CONFIG” on page 158.
To remove threshold levels from the ports, refer to “NO STORM-
CONTROL” on page 213.
Confirmation Commands
“SHOW STORM-CONTROL” on page 233
“SHOW RUNNING-CONFIG” on page 158
To Next Page
Loading...
