Chapter 77: Quality of Service (QOS) Commands
1322 Section X: Network Management
NO WRR-QUEUE WEIGHT
Syntax
no wrr-queue weight
Parameters
None.
Mode
Port Interface mode
Description
Use this command to set the CoS scheduling method on the ports to strict
priority so that they transmit packets from higher priority queues before
packets in lower priority queues.
Confirmation Command
“SHOW MLS QOS INTERFACE” on page 1323
Example
This example configures ports 6 to 8 for the strict priority scheduling
method:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.6-port1.0.8
awplus(config-if)# no wrr-queue weight
To Next Page
Loading...
