AT-9000 Switch Command Line User’s Guide
513
SHOW FILE SYSTEMS
Syntax
show file systems
Parameter
None
Mode
Privileged Exec mode
Description
Use this command to display the specifications of the file system in the
switch. An example is shown in Figure 97.
Figure 97. SHOW FILE SYSTEMS Command
The fields are described in Table 47.
Size (b) Free (b) Type Flags Prefixes S/D/V Lcl/Ntwk Avail
-------------------------------------------------------------------------
2.0M 1.4M flash rw /cfg/ static local Y
Table 47. SHOW FILE SYSTEMS Command
Parameter Description
Size (B) The total amount of flash memory in the
switch. The amount is given in megabytes
(M) or kilobytes (k).
Free (B) The amount of unused flash memory in
the switch. The amount is given in
megabytes (M) or kilobytes (k).
Type The type of memory.
This is always “flash” for flash memory.
Flags The file setting options.
This is always “rw” for read-write.
Prefixes The directory in which files are stored.
This is always “cfg” for configuration file.
To Next Page
Loading...
Need help?
General
