Chapter 79: Local Manager Account Commands
1352
USERNAME
Syntax
username
name
privilege
level
password
[8]
password
Parameters
name
Specifies the name of a new manager account. The name is case-
sensitive and can have up to 15 alphanumeric characters including
special characters. Spaces are not allowed.
level
Specifies the privilege level of either 1 or 15 for the new account.
Manager accounts with the privileged level 15 have access to all of
the command modes, unless command mode restriction is
activated. Manager accounts with the privilege level 1 are
restricted to the User Exec mode.
8
Specifies that the password is encrypted.
password
Specifies the password of the new manager account. A non-
encrypted password is case-sensitive and can have up to 16
alphanumeric characters including punctuation and printable
special characters. Spaces are not permitted.
Mode
Global Configuration mode
Description
Use this command to create new manager accounts on the switch.
Passwords for manager accounts used with the web browser
interface must not be encrypted.
Confirmation Command
“SHOW RUNNING-CONFIG” on page 158
To Next Page
Loading...
Need help?
General
