AT-9000 Switch Command Line User’s Guide
757
REGION
Syntax
region
<region-name>
Parameters
region-name
Specifies the name of an MST region. Up to 32 characters.
Mode
MSTP Configuration mode
Description
Use this command to name the MSTP Region.
Confirmation Command
“SHOW RUNNING-CONFIG” on page 158 or “SHOW SPANNING-TREE”
on page 743
Example
This example names the MSTP region “santa clara county:”
awplus> enable
awplus# configure terminal
awplus(config)# spanning-tree mst enable
awplus(config)# spanning-tree mst configuration
awplus (config-mst)# region santa_clara_county
To Next Page
Loading...
