AT-9000 Switch Command Line User’s Guide
1063
SNMP-SERVER USER
Syntax
snmp-server user
username
groupname
[auth sha|md5
auth_password] [priv des priv_password]
Parameters
username
Specifies a name for a new SNMPv3 user. A name can have up to
32 alphanumeric and/or special characters and is case sensitive.
Spaces are not allowed.
groupname
Specifies a name of a group for a new user. A group name can
have up to 32 alphanumeric and/or special characters and is case
sensitive. Spaces are not allowed.
auth
Specifies an authentication protocol for a user. The options are:
md5: The MD5 Message Digest Algorithms authentication
protocol.
sha: The SHA Secure Hash Algorithms authentication protocol.
auth_password
Specifies a password for authentication. A password can have up
to 40 alphanumeric and/or special characters and is case sensitive.
Spaces are not allowed.
priv_password
Specifies a password for privacy with the 3DES Data Encryption
Standard. A password can have up to 40 alphanumeric and/or
special characters and is case sensitive.
Mode
Global Configuration mode
Description
Use this command to create new SNMPv3 users. A new user can have a
security level of no security, authentication only, or authentication and
privacy. The security level is assigned in the following manner:
To create a user that has neither authentication nor privacy, omit
both the AUTH and PRIV keywords.
To Next Page
Loading...
Need help?
General
