Allied Telesis AT-9000 Series User Manual

AT-9000 Switch Command Line User’s Guide
225
SHOW INTERFACE BRIEF
Syntax
show interface brief
Parameter
None
Modes
Privileged Exec mode
Description
Use this command to display the administrative and link statuses of all of
the ports on the switch. An example of the information is shown in
Figure 51.
Figure 51. SHOW INTERFACE BRIEF Command
The fields are described in Table 14.
Table 14. SHOW INTERFACE BRIEF Command
Field Description
Interface Indicates the port number.
Status Indicates the administrative state of the
port. The administrative state is DOWN if
the port was disabled with the
SHUTDOWN command. Otherwise, the
administrative state of the port is UP. To
disable and enable ports, refer to
“SHUTDOWN” on page 237 and “NO
SHUTDOWN” on page 211, respectively.
Interface StatusProtocol
port1.0.1admin up down
port1.0.2admin up down
port1.0.3admin up down
port1.0.4admin up down
port1.0.5admin up down
port1.0.6admin up down

Allied Telesis AT-9000 Series Specifications

General

Brand	Allied Telesis
Model	AT-9000 Series
Category	Switch
Language	English