Allied Telesis AT-9000 Series - Show Ip Igmp Snooping; Figure 95: SHOW IP IGMP SNOOPING Command

Chapter 26: IGMP Snooping Commands
488
SHOW IP IGMP SNOOPING
Syntax
show ip igmp snooping
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display the IGMP snooping parameters. Figure 95
illustrates the information.
Figure 95. SHOW IP IGMP SNOOPING Command
IGMP Snooping Configuration:
IGMP Snooping Status ............... Enabled
Host Topology ...................... Single-Host/Port
Host/Router Timeout Interval ....... 255 seconds
Maximum IGMP Multicast Groups ...... 64
Router Port(s) ..................... Auto Detect
Router List:
VLAN ID Port/Trunk ID RouterIP Exp. Time
----------------------------------------------------
1 port1.0.31 10.0.0.254 110
Host List:
Number of IGMP Multicast Groups: 2
MulticastGroup VLAN ID Port/TrunkID HostIP IGMP Ver Exp.Time
------------------------------------------------------------
0100.5e7f.ffff 1 port1.0.1 192.169.20.50 v3 200
0100.5e7f.ffff 1 port1.0.30 172.16.20.222 v2 45
0100.5e64.3201 1 port1.0.15 10.10.5.01 v1 161