Allied Telesis AT-9000 Series - Service Ssh

AT-9000 Switch Command Line User’s Guide
1391
SERVICE SSH
Syntax
service ssh
Parameters
None
Mode
Global Configuration mode
Description
Use this command to enable the Secure Shell server on the switch.
You must create an encryption key before enabling the server. For
instructions, refer to “CRYPTO KEY GENERATE HOSTKEY” on
page 1388.
Confirmation Command
“SHOW SSH SERVER” on page 1393
Example
This example enables the Secure Shell server on the switch:
awplus> enable
awplus# configure terminal
awplus(config)# service ssh